AT THE TRACK OR ON THE ROAD, TRUST AMKUS RESCUE SYSTEMS

Products - Browse All

GH2B-MCH MINI POWER UNIT
- Gas powered Honda® engine
- Two tool simultaneous operation
- Increased first stage pressure reduces cycle times
- "BOOST" mode. When in alternate tool operation, increases tool speed in both pump stages
- Newly designed 3-position control valves
- Direct mounted Standard Couplings or single connection Mono Couplings
- Modular design reduces time required for service
LEARN MORE
The Ultimate
- The Ultimate is a PTO driven hydraulic rescue system that provides superior performance with maximum versatility. This is not just another power unit; this is a system that is customized to your requirements.
- Simultaneous use of multiple tools
- Saves valuable compartment space
- The use of long hose lengths without any loss of speed or power
- Pre-connecting tools allows your personnel to grab and go
- Some of your options include:
- The ability to run up to 6 AMKUS tools simultaneously
- The ability to run hydraulic generators and low pressure tools such as pavement breakers, ventilation fans, chain saws, etc.
- At the scene control with the Ultimate's pendant control system
LEARN MORE
ARRS1 Rope Rescue System
- Sets up in under 2 minutes
- Eliminates setting up time-consuming pulley systems
- Eliminates need for load releasing hitches
- Reduces number of rescuers needed topside (2 people can do the work of approximately 8-10 used in traditional rope rescue)
- Dramatically reduces complexity of any rope rescue
- Achieve and maintain greater proficiency with less training
- Passes knots with ease
- 1000 lb. working capacity with 10:1 safety margin
- Simple operation reduces probability of dangerous mistakes
- Instant stop with zero shock loading
- Rope automatically aligns with the direction of the load
- Precise control allows a load to be raised and lowered a fraction of an inch at a time for critical precision lifting
- Precision lifting and lowering speed control
LEARN MORE
AMK-ERR100: Electric Rewind Hose Reel
- Available with 50' or 100' of hose
- Available with Standard Couplings or Mono Couplings
- Electric motor can be mounted on any lower corner of the reel to allow nesting of reels and save compartment space
- Reinforced hose reel drum will protect it from becoming damaged and increase the life of your hose reel.
- Hose crimp protector guards the hose from the effects of pressurized hoses squeezing and putting stress on the hose connection.
LEARN MORE
HP101-STD Hand Pump
- Part No. 741200551010
- Two stage pump design
- Ideal for hazardous environments
- Completely portable
- Quick connects included
- Conversion available for foot pedal operation
LEARN MORE
A101-STD Foot Pump
- Part No. 731200561000
- May be used with SCBA cylinders
- Excellent for haz-mat operations
- Quick connects included
- Air regulators available
LEARN MORE
HH2S
- Part No. 75120ECRRR0A
- Powered by external hydraulic pump (not supplied by AMKUS)
- Two high pressure, 2-stage pumping systems
- Two tools can be connected and operated simultaneously
- Two 2-way, 2-position selector valves
- Non-toxic mineral base hydraulic fluid
LEARN MORE
GB2S – XLO
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: MTO
- Part No. 701203512040
- Gasoline powered Briggs & Stratton™ overhead valve, 4 cycle engine
- Uses lead free gasoline
- Two high pressure, 2-stage pumping systems
- Two 2-way, 2-position selector valves
- Two tools can be connected and operated simultaneously
- Non-toxic mineral based hydraulic fluid
- Roll cage for protection and one hose loop for storage
- Also available with carrying handle (Model GB2S-STDO)
LEARN MORE
GH2A-MCH Mini
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: ATO
- Part No. 701206516201
- Gasoline powered 4 cycle Honda® engine
- Uses lead free gasoline
- High pressure, 2-stage pumping system
- 4-way, 3-position selector valve
- Two tools can be connected simultaneously
- Alternate tool operation
- Non-toxic mineral based hydraulic fluid
- Includes spark arresting muffler
- Easy access drain port to drain hydraulic fluid from pump
- Carrying Handle
- Also available with a roll cage (Model GH2A-MC)
- Optional Quick Connect Coupling, Part No. 792200001041
LEARN MORE
GH2A – MC Mini
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: ATO
- Part No. 701205516201
- Uses lead free gasoline
- High pressure, 2-stage pumping system
- 4-way, 3-position selector valve
- Two tools can be connected simultaneously
- Alternate tool operation
- Non-toxic mineral based hydraulic fluid
- Includes spark arresting muffler
- Easy access drain port to drain hydraulic fluid from pump
- Roll cage for protection
- Also available with a carrying handle (Model GH2A-MCH)
- Optional Quick Connect Coupling, Part No. 792200001041
LEARN MORE
EF2S – XL
- Certified Model NFPA 1936, 2010 edition
- Electric powered, 3.0 H.P., Washdown motor
- Two high pressure, 2-stage pumping systems
- Two 2-way, 2-position selector valves
- Two tools can be connected and operated simultaneously
- Non-toxic mineral based hydraulic fluid
- Roll cage for protection and one hose loop for storage
- 220/240 volt single phase
- Part No. 711201531040
- Electric Specifications
- Also available with a carrying handle (Model EF2S-STD)
LEARN MORE
EF2S
- Certified Model NFPA 1936, 2010 edition
- Part No. 711201531042
- Electric powered, 3.0 H.P., Washdown motor
- Two high pressure, 2-stage pumping systems
- Two 2-way, 2-position selector valves
- Two tools can be connected and operated simultaneously
- Non-toxic mineral based hydraulic fluid
- 220/240 volt single phase
- Electric Specifications
- Also available with a carrying handle (Model EF2S-STD)
LEARN MORE
GH2S2 – XL
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: MTO
- Part No. 70120G512050
- Gasoline powered Honda ® 4 cycle engine
- Uses lead free gasoline
- Two high pressure, 2-stage pumping systems
- Two 2-way, 2-position selector valves
- Two tools can be connected and operated simultaneously
- Non-toxic mineral based hydraulic fluid
- Roll cage for protection and one hose loop for storage
- Also available with carrying handle (Model GH2S2-STD)
LEARN MORE
240SS Super Simo
- Electric Power Unit, 240 volt single phase power
- Provides performance virtually the same as the AMKUS Ultimate system.
- Two tools can be connected and operated simultaneously
- Can be used with hose lengths up to 200’
- Complete on-board circuit panel for: individual motor and circuit activation, LED circuit status display, LCD display for operational diagnostics, integrated low oil warning and low oil shutdown
- Uses AMKUS Non-toxic mineral base hydraulic fluid
- Optional wireless remote control with emergency shut down
LEARN MORE
AMK – 60R
- Part No. 110200376000
- Unique base design distributes load
- Check valve design maintains load
- Push/pull design allows use of AMK-30CX chain package
- Accessories available for increased capabilities
- Anodized for corrosion protection
LEARN MORE
AMK – 40R
- Part No. 110200374000
- Unique base design distributes load
- Check valve design maintains load
- Push/pull design allows use of AMK-30CX chain package
- Accessories available for increased capabilities
- Anodized for corrosion protection
LEARN MORE
AMK – 30R
- Part No. 110200373000
- Unique base design distributes load
- Check valve design maintains load
- Push/pull design allows use of AMK-30CX chain package
- Accessories available for increased capabilities
- Anodized for corrosion protection
LEARN MORE
AMK – 20R
- Part No. 110200372000
- Unique base design distributes load
- Check valve design maintains load
- Push/pull design allows use of AMK-30CX chain package
- Accessories available for increased capabilities
- Anodized for corrosion protection
LEARN MORE
AMK – 25C Combination Tool
- Combination cutting/spreading/pulling tool
- Extremely lightweight, compact size for easy storage
- Ideal for "first response" applications
- Anodized for corrosion protection
- Check valve design maintains load
- Available with D-ring handle
- Convert a Model AMK-25C Combination Tool to any Model 25 Cutter with genuine AMKUS blades
LEARN MORE
AMK – C15 Combination Tool
- Combination cutting/spreading/pulling tool
- Well balanced and easy to use
- Check valve design maintains load
- Anodized for corrosion protection
- Equipped with D-ring handle
LEARN MORE
AMK – 24 Spreader
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: AS33/609-17.0
- Part No. 320200001000
- Unique construction allows maximum usable force
- Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
- Removable tips to accept chain package and optional tips for versatility
- Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)
- Control valve placement provides compact design allowing greater access for the user
- Excellent balance and natural hand placement
- Anodized for corrosion protection
LEARN MORE
AMK – 28 Spreader
- Part No. 310301451000
- A 28" (711 mm) spreader provides an economical alternative to full size spreaders
- Linkage / arm drive provides superior forces
- Check valve design maintains load
- Anodized for corrosion protection
LEARN MORE
AMK – 30CX Spreader
- Part No. 300204461000
- The lightest weight, full size spreader available
- Unique construction allows maximum usable force
- Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
- Check valve design maintains load
- Excellent balance
- Anodized for corrosion protection
LEARN MORE
AMK – 30CRT Spreader
- Part No. 300204462000
- Unique construction allows maximum usable force
- Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
- Removable tips to accept chain package and optional tips for versatility
- Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)
LEARN MORE
AMK – 25S Wide Opening Cutter
- Special application cutter
- Wide tip opening for pipe, angle and channel cutting operations
LEARN MORE
AMK – 25E Speedway Cutter
- Long blade and wide opening covers the need for continuous cutting such as: "B" & "C" posts, third doors and roofs
- Designed for racing but lends itself to everyday vehicle rescue
- Convert to a Special Application Cutter with Genuine AMKUS Blades
LEARN MORE
AMK – 25 Heavy Duty Cutter
- Extremely compact, powerful and versatile
- Proven design - thousands in use worldwide
- Capable of automotive cutting requirements
- Anodized for corrosion protection
- Available with D-ring handle
- Convert to a Special Application Cutter with Genuine AMKUS Blades
LEARN MORE
AMK – 21A Cutter
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: AC132D-15.9
- 110,000 lbs cutting force
- Rotating handle
- Cuts Boron and other exotic metals
LEARN MORE
AMK – 22 Cutter
- Certified Model NFPA 1936, 2010 edition
- EN 13204 Designation: AC127F-20.9
- Designed to handle the advanced high strength steels in new model vehicles, not just NFPA
- Boron
- Martensite
- Ultra High Strength Steels
- Over 200,000 lbs of cutting force
LEARN MORE
AMKUS Decals
- AMKUS decals are available for your auto/truck, helmets, etc.
- View PDF
LEARN MORE
AMK – Hat
- 2014 AMKUS Hat
LEARN MORE
AMK – Shirt
- Available in sizes Medium through 3XL
- $7
LEARN MORE

Copyright © 2013 - Amkus Inc. - Privacy Policy - Terms of Use
2700 Wisconsin Ave. Downers Grove, IL 60515

1-800-592-6587